Steel-Craft Door Products Ltd.

Therm-O-Dor

Steel-Craft’s Therm-O-Dor overhead doors are manufactured from top-quality, Canadian-made steel, and are designed from the inside out to ensure maximum strength. Our doors feature a patented mechanical interlock design and heavy-duty hardware. Together, these features offer industry-leading durability and excellent protection against break-ins.

All Therm-O-Dor overhead doors are corrosion-resistant and feature treatments of a zinc base coating and two polyester topcoats. The exteriors are paintable, won’t fade, and are easy to clean.

The TD 138 model comes with a 1-3/8" layer of polyurethane insulation, which gives an R-value of 12.60, twice the efficiency of competitors’ polystyrene panels.

The TD 134 model comes with a 1-3/4" layer of polyurethane insulation, which gives an R-value of 16.04, twice the efficiency of competitors’ polystyrene panels.

Our unnecessary warranty covers all Thermo-O-Dor overhead doors.

Find a dealer

Features
  • Flexible top seal keeps cold and debris out
  • Section weather seals keep wind and cold out
  • PVC retainer aids in door rigidity
  • Top-quality Canadian galvanized steel is durable and rust resistance
  • Two-coat exterior polyester paint finish on inner and outer skin is extremely durable
  • Therm-O-Break design reduces cold/heat/moisture conductivity
  • Mechanically interlocked front and back skins increase strength
  • TD 134 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 16.04 in just 1-3/4" of thickness
  • TD 138 — CFC- and HCFC-free polyurethane core bonds to steel skins and nets an R-value of 12.60 in just 1-3/8" of thickness
  • Continuous steel overlap secures hardware attachments
  • Flexible floor seal conforms to minor irregularities to keep out cold and debris
  • Insulated windows feature sealed lites and high-impact polymer frames
  • Heavy-duty rollers and hardware are durable and make for easy installation
TD 138 Optional Features
END STILES

Single end

HINGES

14ga single end

11ga single end*

14ga intermediate

TRACK ROLLERS

2" 10 ball short stem

3" 10 ball short stem

2" 10 ball long stem*

3" 10 ball long stem*

SPECIALITY TRACK ROLLERS LONG STEM

2" nylon sealed bearing*

3" UHMW sealed bearing*

3" rubber sealed bearing*

3" nylon stainless shaft*

TOP FIXTURE

Standard duty single

BOTTOM CORNER BRACKETS

Standard duty

LOCKS

Sidelock

Interior barlock*

Exterior keyed barlock*

HANDLES

Tub handle*

PVC hand grip*

Handle step plate*

VISION LITES

23" x 7" *

24" x 12" *

34" x 16" *

EXHAUST PORTS

3" *

4" *

5" *

STRUTTING

DASMA PVCP Standard

Available to increase windload capacities*

WEATHERSTRIP - bottom

3" U-type

4" U-type*

WEATHERSTRIP - top

2" top flap

WEATHERSTRIP - side

Steel/vinyl

PVC/vinyl*

WEATHERSTRIP RETAINER

Bottom PVC V

TOP PVC V

GUIDE TYPES

Standard lift

High lift*

Vertical lift*

Low lift double track*

(all available to allow following the roof slope if needed). Horizontal reinforcing engineered for specific size requirements.

GUIDE MOUNTING

Bracket mount

Angle mount continuous 13ga*

Angle mount reverse 13ga*

TORSION SPRINGS

Standard 10,000 cycle

Optional increased cycle*

TORSION SHAFTS

(engineered for specific requirements)

14ga galvanized tube 1"

Cold roll solid shaft 1"

TORSION SHAFT BEARINGS

Standard flange bearing 1"

2 bolt cast flange bearing 1" *

TORSION BEARING PLATES

(engineered for specific weight requirements)

More options:

Therm-O-Dor TD-138 offers a selection of customized options that will enable you to meet virtually any application requirement. For additional information on how Steel-Craft can meet your needs in commercial overhead doors, please consult your Steel-Craft Dealer.

Door Face

Optional upgrades to components that are connected to the door face.

  1. Graduated End Hinge - available in increased gauge.
  2. Track Rollers - available in a variety of formats to meet your specifications.
  3. Low Lift Hardware
  4. Locks - 2 point interior, 2 point exterior.
  5. Lift Handle - 3 options available.
  6. Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
  7. Exhaust Ports - available in various sizes.
  8. Strutting - to increase wind load capacity.
  9. Specialty High Moisture Area Conversions
Guide

Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.

  1. High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
  2. Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
  3. Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
  4. Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift

Optional upgrades to components that are related to the door lift.

  1. Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
  2. Torsion Shaft - available in 1" solid where 1" tube is specified.
  3. End Bracket - 2-bolt flange bearing, available in 1".
TD 134 Optional Features
END STILES

Single end

Double end 17'w+

HINGES

14ga single end

11ga single end*

14ga double end 17'w+

11ga double end 1000lbs

14ga intermediate

TRACK ROLLERS

2" 10 ball short stem

3" 10 ball short stem

2" 10 ball long stem

3" 10 ball long stem

SPECIALITY TRACK ROLLERS LONG STEM

2" nylon sealed bearing*

3" UHMW sealed bearing*

3" rubber sealed bearing*

3" nylong stainless shaft*

TOP FIXTURE

Standard duty single

Standard duty double 17'w+

Heavy duty double 1300lbs*

BOTTOM CORNER BRACKETS

Standard duty

Heavy duty 1300lbs

Heavy duty fail safe*

LOCKS

Sidelock

Interior barlock*

Exterior keyed barlock*

SECTION FACE 20ga*

HANDLES

Tub handle*

PVC hand grip*

Handle step plate*

VISION LITES

23" x 7" *

24" x 12" *

34" x 16" *

Fullview aluminum*

PASS DOOR*
EXHAUST PORTS

3" *

4" *

5" *

STRUTTING

DASMA PVCP Standard

Available to increase windload capacities*

WEATHERSTRIP - bottom

3" U-type

4" U-type*

WEATHERSTRIP - top

2" top flap

3" top flap - 17'w+

WEATHERSTRIP - side

Steel/vinyl

PVC/vinyl*

WEATHERSTRIP RETAINER

Bottom PVC V

Bottom Aluminum L*

TOP PVC V

GUIDE TYPES

Standard lift

High lift*

Vertical lift*

Low lift double track*

(all available to allow following the roof slope if needed). Horizontal reinforcing engineered for specific size requirements.

GUIDE MOUNTING

Bracket mount

Angle mount continuous 13ga*

Angle mount reverse 13ga*

TORSION SPRINGS

Standard 10,000 cycle

Optional increased cycle*

TORSION SHAFTS

(engineered for specific requirements)

14ga galvanized tube 1"

Cold roll solid shaft 1"

Cold roll solid shaft 1-1/4" *

TORSION SHAFT BEARINGS

Standard flange bearing 1"

Heavy duty flange bearing 1" *

2 bolt cast flange bearing 1" *

Center plate flange bearing 1-1/4" *

End plate flange bearing 1-1/4"

2 bolt cast flange bearing 1-1/4" *

TORSION BEARING PLATES

(engineered for specific weight requirements)

Therm-O-Dor TD-134 offers a selection of customized options that will enable you to meet virtually any application requirement. For additional information on how Steel-Craft can meet your needs in commercial overhead doors, please consult your Steel-Craft Dealer.

Door Face

Optional upgrades to components that are connected to the door face.

  1. Graduated End Hinge - available in increased gauge.
  2. Graduated Double End Hinge - available in increased gauge.
  3. Track Rollers - available in a variety of formats to meet your specifications.
  4. Top Fixtures - available in increased gauge.
  5. Low Lift Hardware
  6. Bottom Corner Bracket - available in increased gauge.
  7. Failsafe Bottom Corner Bracket
  8. Locks - 2 point interior, 2 point exterior.
  9. Lift Handle - 3 options available.
  10. Vision Lite Windows - sealed glass: 23"x7"; 24"x12"; 34"x16"; consult your dealer on the wide variety of glass options.
  11. Aluminum - available in full view section; consult your dealer about insert options (glass, polycarbonate - double or triple wall).
  12. Pass Door
  13. Exhaust Ports - available in various sizes.
  14. Strutting - to increase wind load capacity.
  15. Aluminum L Retainer
  16. Specialty High Moisture Area Conversions
  17. Increased Gauge Section Face
Guide

Optional upgrades to components that are related to the door guide. All lifts are available in 2" or 3" track.

  1. High Lift - track and hardware that causes the door to rise vertically some distance above the top of the door opening before it levels out into a horizontal position. Available to meet a variety of height specifications.
  2. Vertical Lift - track and hardware that causes the door to open vertically where no horizontal tracks are required. Available to meet all height specifications.
  3. Low Lift Double Track - low headroom accessories which enable a door system to operate in minimal headroom conditions. Available to meet a variety of low headroom specifications.
  4. Moveable Center Posts
  5. Full Angle Mount - available in Continuous and Reverse (1" overlap).
Lift

Optional upgrades to components that are related to the door lift.

  1. Torsion Spring Assembly - extensive cycle options are available to meet all specifications.
  2. Torsion Shaft - available in 1" solid where 1" tube is specified.
  3. 1-1/4" Solid Shaft
  4. End Bracket - 2-bolt flange bearing, available in 1" and 1-1/4".